HP HP0-812 PDF download - Education - Special Education
HP Proliant/Linux Integration and Performance HP0-812 Test
HP0-812
QUESTION: 1Which utility is included on the SmartStart CD?
A. Array Configuration UtilityB. Fibre Channel Setup UtilityC. Standby Recovery ServerD. System Reset UtilityE. RBSU
Answer: A
QUESTION: 2The kernel usually recognizes the correct amount of memory, however, sometimes thekernel does not recognize all of the memory (RAM) installed in a system. Which commandallows you to check the installed memory?
A. cat /mem/meminfoB. cat /memoryC. cat /proc/meminfoD. cat /proc/info
Answer: C
QUESTION: 3Which command returns the version of the kernel that the system is currently running?
A. ver -xB. version -fC. uname -fD. kname -f
Answer: C
QUESTION: 4What information can be found in the /proc/scsi/scsi file? HP0-812
A. SCSI controllers installed in the systemB. ide devices attached to the systemC. SCSI devices attached to the systemD. SCSI RAID array controllers installed in the system
Answer: C
QUESTION: 5Under the Linux OS, how do you reference a SCSI tape drive?
A. /dev/st0B. /dev/nrst0C. /dev/rft0D. /dev/nrft0
Answer: A
QUESTION: 6Which command line argument can you use to determine if Linux recognizes the SCSI tapedrive?
A. less /etc/scsi/scsiB. less /dev/scsi/scsiC. less /proc/scsi/scsiD. less /var/scsi/scsi
Answer: C
QUESTION: 7The simplest way to store information on a tape is to use the TAR utility. Which commandcan be used to list the contents of the TAR file on the tape?
A. mt /dev/tape statusQUESTION: 3Which command returns the version of the kernel that the system is currently running?
A. ver -xB. version -fC. uname -fD. kname -f
Answer: C
QUESTION: 4What information can be found in the /proc/scsi/scsi file? HP0-812
A. SCSI controllers installed in the systemB. ide devices attached to the systemC. SCSI devices attached to the systemD. SCSI RAID array controllers installed in the system
Answer: C
QUESTION: 5Under the Linux OS, how do you reference a SCSI tape drive?
A. /dev/st0B. /dev/nrst0C. /dev/rft0D. /dev/nrft0
Answer: A
QUESTION: 6Which command line argument can you use to determine if Linux recognizes the SCSI tapedrive?
A. less /etc/scsi/scsiB. less /dev/scsi/scsiC. less /proc/scsi/scsiD. less /var/scsi/scsi
Answer: C
QUESTION: 7The simplest way to store information on a tape is to use the TAR utility. Which commandcan be used to list the contents of the TAR file on the tape?
A. mt /dev/tape status
QUESTION: 3Which command returns the version of the kernel that the system is currently running?
A. ver -xB. version -fC. uname -fD. kname -f
Answer: C
QUESTION: 4What information can be found in the /proc/scsi/scsi file? HP0-812
A. SCSI controllers installed in the systemB. ide devices attached to the systemC. SCSI devices attached to the systemD. SCSI RAID array controllers installed in the system
Answer: C
QUESTION: 5Under the Linux OS, how do you reference a SCSI tape drive?
A. /dev/st0B. /dev/nrst0C. /dev/rft0D. /dev/nrft0
Answer: A
QUESTION: 6Which command line argument can you use to determine if Linux recognizes the SCSI tapedrive?
A. less /etc/scsi/scsiB. less /dev/scsi/scsiC. less /proc/scsi/scsiD. less /var/scsi/scsi
Answer: C
QUESTION: 7The simplest way to store information on a tape is to use the TAR utility. Which commandcan be used to list the contents of the TAR file on the tape?
A. mt /dev/tape status
Original Resource :
Visit HP0-812 Link : HP0-812 Download PDF Link : HP0-812
iAutoblog the premier autoblogger software
1:45 AM
|
|
This entry was posted on 1:45 AM
You can follow any responses to this entry through
the RSS 2.0 feed.
You can leave a response,
or trackback from your own site.
0 comments:
Post a Comment