Linux Community Magazine

Communication Server 1000 to Rls. 6.0 Upgrades for Technicians 922-111 Test

Question: 1A customer with a Communication Server (CS) 1000E Rls. 5.5 HA system with two IPMGs anddual CPPM Signaling Servers is upgrading their system to release 6.0. The system is part of anIP Peer Network that includes a NRS database. Which upgrade step is correct?

A. Use NRS Manager to download the NRS backup file to a compact flash.B. Use Element Manager to download the Signaling Server backup file to a compact.C. User NRS Manager to download the NRS backup file to the local PC.D. Use Element Manager to download the Signaling Server backup file to the local PC.

Answer: C

Question: 2A customer with an existing Option 11C Rls. 5.5 chassis system is planning to upgrade to aCommunication Server 1000E Rls. 6.0 Standard Availability. A CPPM Co-Resident Call Serverand Signaling Server card will be installed. The system will automatically map small systemTerminal Numbers to large system Terminal format during the upgrade. In this upgrade scenario,which actions must be completed manually? (Choose two.)

A. Re-programming Digital Trunk Terminal Numbers with a new format.B. Programming the DSP daughterboards on the IP Media Gateway.C. Entering the IP address for each IP Media Gateway in LD 97.D. Re-programming Tone Receiver Terminal Numbers with a new format.

Answer: B, C

Question: 3A customer with an existing Option 11C Rls. 5.5 chassis system is planning to upgrade to aCommunication Server 1000E Rls. 6.0 Standard Availability. A CPPM card will be installed as aCo-Resident Call Server and Signaling Server during the upgrade. Which task must be completedprior to loading Linux Base onto the card? (Choose two.)

A. The BIOS of the card must be updated to version 18.B. The S5 switch must be set to position 1.C. The CMOS settings must be reset to factory defaults.D. The on-board 1 GB Compact Flash must be installed.

Answer: A, C

Question: 4Click on the Exhibit button.You are upgrading a single site Option 11C Rls. 5.5 system to a Communication Server 1000ERls. 6.0 Standard Availability with a single IP Media Gateway (MG) 1000E chassis. The customeris using a CPPM card from inventory as a CPPM Co-Resident Call Server and Signaling Server.Based on the output received when the card boots up, shown in the exhibit, what must donebefore Linux Base can be loaded?

Question: 1A customer with a Communication Server (CS) 1000E Rls. 5.5 HA system with two IPMGs anddual CPPM Signaling Servers is upgrading their system to release 6.0. The system is part of anIP Peer Network that includes a NRS database. Which upgrade step is correct?

A. Use NRS Manager to download the NRS backup file to a compact flash.B. Use Element Manager to download the Signaling Server backup file to a compact.C. User NRS Manager to download the NRS backup file to the local PC.D. Use Element Manager to download the Signaling Server backup file to the local PC.

Answer: C

Question: 2A customer with an existing Option 11C Rls. 5.5 chassis system is planning to upgrade to aCommunication Server 1000E Rls. 6.0 Standard Availability. A CPPM Co-Resident Call Serverand Signaling Server card will be installed. The system will automatically map small systemTerminal Numbers to large system Terminal format during the upgrade. In this upgrade scenario,which actions must be completed manually? (Choose two.)

A. Re-programming Digital Trunk Terminal Numbers with a new format.B. Programming the DSP daughterboards on the IP Media Gateway.C. Entering the IP address for each IP Media Gateway in LD 97.D. Re-programming Tone Receiver Terminal Numbers with a new format.

Answer: B, C

Question: 3A customer with an existing Option 11C Rls. 5.5 chassis system is planning to upgrade to aCommunication Server 1000E Rls. 6.0 Standard Availability. A CPPM card will be installed as aCo-Resident Call Server and Signaling Server during the upgrade. Which task must be completedprior to loading Linux Base onto the card? (Choose two.)

A. The BIOS of the card must be updated to version 18.B. The S5 switch must be set to position 1.C. The CMOS settings must be reset to factory defaults.D. The on-board 1 GB Compact Flash must be installed.

Answer: A, C

Question: 4Click on the Exhibit button.You are upgrading a single site Option 11C Rls. 5.5 system to a Communication Server 1000ERls. 6.0 Standard Availability with a single IP Media Gateway (MG) 1000E chassis. The customeris using a CPPM card from inventory as a CPPM Co-Resident Call Server and Signaling Server.Based on the output received when the card boots up, shown in the exhibit, what must donebefore Linux Base can be loaded?

Page 1 of 10

Original Resource :

Visit 922-111 Link : 922-111 Download PDF Link : 922-111

Communication Server 1000 to Rls. 6.0 Upgrades for Technicians 922-111 Test

Question: 1A customer with a Communication Server (CS) 1000E Rls. 5.5 HA system with two IPMGs anddual CPPM Signaling Servers is upgrading their system to release 6.0. The system is part of anIP Peer Network that includes a NRS database. Which upgrade step is correct?

A. Use NRS Manager to download the NRS backup file to a compact flash.B. Use Element Manager to download the Signaling Server backup file to a compact.C. User NRS Manager to download the NRS backup file to the local PC.D. Use Element Manager to download the Signaling Server backup file to the local PC.

Answer: C

Question: 2A customer with an existing Option 11C Rls. 5.5 chassis system is planning to upgrade to aCommunication Server 1000E Rls. 6.0 Standard Availability. A CPPM Co-Resident Call Serverand Signaling Server card will be installed. The system will automatically map small systemTerminal Numbers to large system Terminal format during the upgrade. In this upgrade scenario,which actions must be completed manually? (Choose two.)

A. Re-programming Digital Trunk Terminal Numbers with a new format.B. Programming the DSP daughterboards on the IP Media Gateway.C. Entering the IP address for each IP Media Gateway in LD 97.D. Re-programming Tone Receiver Terminal Numbers with a new format.

Answer: B, C

Question: 3A customer with an existing Option 11C Rls. 5.5 chassis system is planning to upgrade to aCommunication Server 1000E Rls. 6.0 Standard Availability. A CPPM card will be installed as aCo-Resident Call Server and Signaling Server during the upgrade. Which task must be completedprior to loading Linux Base onto the card? (Choose two.)

A. The BIOS of the card must be updated to version 18.B. The S5 switch must be set to position 1.C. The CMOS settings must be reset to factory defaults.D. The on-board 1 GB Compact Flash must be installed.

Answer: A, C

Question: 4Click on the Exhibit button.You are upgrading a single site Option 11C Rls. 5.5 system to a Communication Server 1000ERls. 6.0 Standard Availability with a single IP Media Gateway (MG) 1000E chassis. The customeris using a CPPM card from inventory as a CPPM Co-Resident Call Server and Signaling Server.Based on the output received when the card boots up, shown in the exhibit, what must donebefore Linux Base can be loaded?

Question: 1A customer with a Communication Server (CS) 1000E Rls. 5.5 HA system with two IPMGs anddual CPPM Signaling Servers is upgrading their system to release 6.0. The system is part of anIP Peer Network that includes a NRS database. Which upgrade step is correct?

A. Use NRS Manager to download the NRS backup file to a compact flash.B. Use Element Manager to download the Signaling Server backup file to a compact.C. User NRS Manager to download the NRS backup file to the local PC.D. Use Element Manager to download the Signaling Server backup file to the local PC.

Answer: C

Question: 2A customer with an existing Option 11C Rls. 5.5 chassis system is planning to upgrade to aCommunication Server 1000E Rls. 6.0 Standard Availability. A CPPM Co-Resident Call Serverand Signaling Server card will be installed. The system will automatically map small systemTerminal Numbers to large system Terminal format during the upgrade. In this upgrade scenario,which actions must be completed manually? (Choose two.)

A. Re-programming Digital Trunk Terminal Numbers with a new format.B. Programming the DSP daughterboards on the IP Media Gateway.C. Entering the IP address for each IP Media Gateway in LD 97.D. Re-programming Tone Receiver Terminal Numbers with a new format.

Answer: B, C

Question: 3A customer with an existing Option 11C Rls. 5.5 chassis system is planning to upgrade to aCommunication Server 1000E Rls. 6.0 Standard Availability. A CPPM card will be installed as aCo-Resident Call Server and Signaling Server during the upgrade. Which task must be completedprior to loading Linux Base onto the card? (Choose two.)

A. The BIOS of the card must be updated to version 18.B. The S5 switch must be set to position 1.C. The CMOS settings must be reset to factory defaults.D. The on-board 1 GB Compact Flash must be installed.

Answer: A, C

Question: 4Click on the Exhibit button.You are upgrading a single site Option 11C Rls. 5.5 system to a Communication Server 1000ERls. 6.0 Standard Availability with a single IP Media Gateway (MG) 1000E chassis. The customeris using a CPPM card from inventory as a CPPM Co-Resident Call Server and Signaling Server.Based on the output received when the card boots up, shown in the exhibit, what must donebefore Linux Base can be loaded?

Page 1 of 10

Original Resource :

Visit 922-111 Link : 922-111 Download PDF Link : 922-111

Communication Server 1000 to Rls. 6.0 Upgrades for Technicians 922-111 Test

Question: 1A customer with a Communication Server (CS) 1000E Rls. 5.5 HA system with two IPMGs anddual CPPM Signaling Servers is upgrading their system to release 6.0. The system is part of anIP Peer Network that includes a NRS database. Which upgrade step is correct?

A. Use NRS Manager to download the NRS backup file to a compact flash.B. Use Element Manager to download the Signaling Server backup file to a compact.C. User NRS Manager to download the NRS backup file to the local PC.D. Use Element Manager to download the Signaling Server backup file to the local PC.

Answer: C

Question: 2A customer with an existing Option 11C Rls. 5.5 chassis system is planning to upgrade to aCommunication Server 1000E Rls. 6.0 Standard Availability. A CPPM Co-Resident Call Serverand Signaling Server card will be installed. The system will automatically map small systemTerminal Numbers to large system Terminal format during the upgrade. In this upgrade scenario,which actions must be completed manually? (Choose two.)

A. Re-programming Digital Trunk Terminal Numbers with a new format.B. Programming the DSP daughterboards on the IP Media Gateway.C. Entering the IP address for each IP Media Gateway in LD 97.D. Re-programming Tone Receiver Terminal Numbers with a new format.

Answer: B, C

Question: 3A customer with an existing Option 11C Rls. 5.5 chassis system is planning to upgrade to aCommunication Server 1000E Rls. 6.0 Standard Availability. A CPPM card will be installed as aCo-Resident Call Server and Signaling Server during the upgrade. Which task must be completedprior to loading Linux Base onto the card? (Choose two.)

A. The BIOS of the card must be updated to version 18.B. The S5 switch must be set to position 1.C. The CMOS settings must be reset to factory defaults.D. The on-board 1 GB Compact Flash must be installed.

Answer: A, C

Question: 4Click on the Exhibit button.You are upgrading a single site Option 11C Rls. 5.5 system to a Communication Server 1000ERls. 6.0 Standard Availability with a single IP Media Gateway (MG) 1000E chassis. The customeris using a CPPM card from inventory as a CPPM Co-Resident Call Server and Signaling Server.Based on the output received when the card boots up, shown in the exhibit, what must donebefore Linux Base can be loaded?

Question: 1A customer with a Communication Server (CS) 1000E Rls. 5.5 HA system with two IPMGs anddual CPPM Signaling Servers is upgrading their system to release 6.0. The system is part of anIP Peer Network that includes a NRS database. Which upgrade step is correct?

A. Use NRS Manager to download the NRS backup file to a compact flash.B. Use Element Manager to download the Signaling Server backup file to a compact.C. User NRS Manager to download the NRS backup file to the local PC.D. Use Element Manager to download the Signaling Server backup file to the local PC.

Answer: C

Question: 2A customer with an existing Option 11C Rls. 5.5 chassis system is planning to upgrade to aCommunication Server 1000E Rls. 6.0 Standard Availability. A CPPM Co-Resident Call Serverand Signaling Server card will be installed. The system will automatically map small systemTerminal Numbers to large system Terminal format during the upgrade. In this upgrade scenario,which actions must be completed manually? (Choose two.)

A. Re-programming Digital Trunk Terminal Numbers with a new format.B. Programming the DSP daughterboards on the IP Media Gateway.C. Entering the IP address for each IP Media Gateway in LD 97.D. Re-programming Tone Receiver Terminal Numbers with a new format.

Answer: B, C

Question: 3A customer with an existing Option 11C Rls. 5.5 chassis system is planning to upgrade to aCommunication Server 1000E Rls. 6.0 Standard Availability. A CPPM card will be installed as aCo-Resident Call Server and Signaling Server during the upgrade. Which task must be completedprior to loading Linux Base onto the card? (Choose two.)

A. The BIOS of the card must be updated to version 18.B. The S5 switch must be set to position 1.C. The CMOS settings must be reset to factory defaults.D. The on-board 1 GB Compact Flash must be installed.

Answer: A, C

Question: 4Click on the Exhibit button.You are upgrading a single site Option 11C Rls. 5.5 system to a Communication Server 1000ERls. 6.0 Standard Availability with a single IP Media Gateway (MG) 1000E chassis. The customeris using a CPPM card from inventory as a CPPM Co-Resident Call Server and Signaling Server.Based on the output received when the card boots up, shown in the exhibit, what must donebefore Linux Base can be loaded?

Page 1 of 10

Original Resource :

Visit 922-111 Link : 922-111 Download PDF Link : 922-111

Dedicated servers are the immediate needs of companies because they allow them to manage their websites in the most profitable manner. The best-dedicated server is the one that can be easily used for serving the needs of a company. It only hosts a single website or domain name. Dedicated servers can also have more than one website but they all fulfill the needs of the same company.

It is necessary to use a dedicated server for a company when its website gets a large amount of traffic. The host company takes care of the website from a remote location but the client has total control over the website. The dedicated servers can only contain the data of a company, but they cannot be used to process any of the customer's queries. However, now some servers exist that also process data apart from acting as a server. The dedicated servers are not physically placed with the company; rather the hosting company has them.

The components of any dedicated server are its operating system, the software and its connectivity with the internet. All such components are placed in the data centers of the hosting company. Since a dedicated server can function on both Linux and windows servers, both Linux dedicated servers and Windows Dedicated Server exist.

Such control was necessary because companies felt that hosting companies did not have the specialization to manage their advanced Ecommerce sites.. However, these websites were the need of complex businesses for promoting sales. Therefore, companies through such servers can manage such sites themselves from far locations. Therefore, the need for dedicated servers has emerged because since past companies desired an exclusive control over their websites. Such servers also save the cost for hosting companies. They get exclusive power facilities and bandwidth at the speed of 10 or 100 Mb/s Ethernet. Heavy initial investment is not required to buy a dedicated server.

Managed dedicated servers also exist which ensure that the company decides the content of its website. It also makes changes in the website from time to time.

A Windows dedicated server implies that the users can benefit by installing servers with point and click management. They can introduce changes in the website easily since they are not giving the server space to someone else. The users are aware of what kind of operations are actually working on the server. Such web based applications that require technologies like.NET, SQL, Microsoft exchange and cold fusion can be used easily on such servers. The company knows even the traffic, which is gained by a server. Applications, which receive a high amount of traffic on a daily basis, are ideal for such servers. Such servers use the windows 2003 and 2008 operating systems. Linux dedicated servers by hosting providers use Red Hat Enterprise that is a commercial adaptation of this software. Cheap dedicated servers can also be a preferred choice of the company but they should have the essential attributes of high bandwidth and data backup. Such data backup is extremely important to safeguard the company in event of a server crash.

Usually Windows Web Hosting described as the most famous earlier framework and the most primary level web hosting service because everyone is well familiar with its environment. It all started with a small static Website in HTML with a few photos and a simple scripting language. The site gives users to gain access, even it allows a good interaction with the site and some online stores of goods and services. It was previous or you can say earliest idea of the Windows hosting.

With the coming of multimedia applications, and concrete way for the public on the Internet in the world. Web hosting companies listed in the evolutionary process, to make room for freedom and web hosting business increased unimaginably. Even it is as simple as it never before and in present situation it is the best online business. Aside from technological progress, today many hosting companies are also include the environmental-friendly existence and many of them offering different types of the hosting packages which are easily available on their site.

Windows Hosting has been greatest demand in market, but all the costs to the hosting is bit more than other forms of hosting. However, the Windows operating system has an important role in the practicability and quality of web hosting services. Those companies who have the windows operating system, usually prefers Windows web-hosting plan.

Even so, in the web hosting world the second most important hosting feature is Linux web hosting. It is as much strong and reliable as Windows network and also it is an open source operating system so user get the high quality hosting with low cost. It is difficult to compare the difference between the Windows operating system, and other operating system, but you can feel more user friendly environment with Windows hosting.

The Linux-based web servers are great for PHP and MySQL features. To carry out all coded PHP web site you can find it is compatible with Windows systems as well but it is certainly requires the Linux support for the sophisticated operation of this act. The tags and codes used in it are quiet similar to HTML, but user can includes applications and scripting on the server side as well. In addition, these dynamic pages that store data, and changes to restore the data in this table might be useful.

It depends on your skill and comfort with the operating system. Many web designer and programmers have different requirements depending on their areas of expertise. If they are familiar with Linux-based web hosting, because of their experience and expertise in Linux-based operating system they will surly choose Linux hosting. In addition, the expert in ASP, ASP.NET will choose Windows Web Hosting because it is compatible with IIS. With Windows Web Hosting you can experience greater freedom relative to your Website. It offers many ways to develop your web pages to upload on your site. These web pages you can send through FTP, as well as the costs are very low cost.